I’ve had the chance to test out the Beretta APX, and let me tell you, it’s an impressive piece of hardware. But, there are some problems with it that you should know about.
I encountered common Beretta APX problems, include ejection problems, slide stop issues, case rupture concerns, extractor woes, and complications with the firing pin. I’ve figured out some fixes that could save you a whole lot of trouble down the line.
So, what’s the aim of this article? Simple. I’m going to break down these issues one by one and offer up some solutions that worked for me.
Problems I’ve Encountered & their Solutions
|Switch to high-pressure ammunition to correct the ejection path. Keep eye protection on.
|Slide Stop Issue
|Install Beretta’s Oversized Slide Stop for better grip and control.
|Send the gun back to Beretta for repairs. Maintain communication with their support team for updates.
|Tighten the extractor or replace its spring. Contact Beretta for guided assistance.
|Firing Pin Problem
|Stop using the gun and contact Beretta immediately. They’ll likely send a new slide and request the faulty one back for further investigation.
Top 5 Beretta APX Problems & Solutions
1. Ejection Problem
So, here’s the thing. While using the Beretta APX, I encountered a pretty concerning ejection issue. Trust me, it’s not something to brush off.
The shell casings didn’t just go sideways; they came right back at my face. Yep, you heard that right. Occasionally, they veered off to the left even though the ejection port was on the right side of the gun.
No joke, this isn’t just a simple inconvenience. I even saw ejectors blown out, which highlights how serious this problem can be.
Now, let’s talk solutions. I discovered that the stout spring and particular internal design of the Beretta APX were the culprits here.
So, what did I do? I switched to high-pressure ammunition, and let me tell you, the problem practically vanished.
After firing several hundred rounds of this high-pressure ammo, it seemed like the spring broke in a bit, making the ejection process smoother even with other types of ammo. But hey, let’s not throw caution to the wind.
Always, and I mean always, keep your eye protection on. It’s a workaround that’s worked for me and might just work for you, too.
2. Slide Stop Issue
Let’s talk about the slide stop issue that caught my eye during my field testing of the Beretta APX. Getting to that slide stop was like trying to catch smoke; my fingers just couldn’t get a good grip.
It was uncomfortably short and led me to question the thought process behind the gun’s design.
Now, here comes the good part. Beretta didn’t just sit on their hands; they took notice and introduced an Oversized Slide Stop for the APX.
After putting it on my gun, oh boy, what a transformation! The short slide stop problem? Gone. It’s like switching from riding a bike with a flat tire to a high-speed race bike.
The control, the ease; it was all there. So, if you’ve found yourself wrestling with the same issue, this Oversized Slide Stop is a godsend. It’s a cinch to install, and the outcome? Pure relief and control. A total game-changer in my book.
3. Case Rupture Problems
Let’s get into something that really had me on edge: the tendency for the case to rupture while using the Beretta APX. At first, I chalked it up to low-quality ammo, but I was wrong.
It turned out that the chamber design of the APX was a contributing factor. When a rupture happened, the fallout wasn’t just bad; it was dangerous.
We’re talking hot, sharp metal shrapnel flying in all directions. Forget inconvenience; this is a downright safety hazard that can’t be ignored. It caught me off guard, and I knew it needed immediate resolution.
So, what did I do? I took the most common route: sending the gun back to Beretta for repairs. The gun came back “fixed,” but there wasn’t much clarity on what was actually done. If I had to guess, it could involve a stronger recoil spring or even modifications to the chamber’s geometry.
The ultimate fix might require a new version of the gun or aftermarket barrels to solve this issue for good. In the meantime, I advise being cautious and maintaining open communication with Beretta’s support team. It’s a serious issue that calls for serious attention.
4. Extractor Issue
Let’s dive into another issue that’s hard to ignore: problems with the extractor on the Beretta APX. It didn’t matter if the gun was fresh out of the box or had seen some mileage; the issue was stubbornly persistent.
Picture this: One minute, the magazine is projectile-ejecting, and the next, the extractor itself is flying off the gun! Needless to say, it was downright unsettling.
My trust in the APX started to wobble like a table with a short leg. Dealing with such inconsistent, surprising malfunctions had me second-guessing every shot.
So, what’s the remedy? Thankfully, it turns out you don’t need to break the bank to fix this one. A simple tightening of the extractor or a spring replacement usually does the trick.
I rang up Beretta’s support team, and they were eager to guide me through the repair process. Trust restored! No more nagging worries or unexpected glitches.
If you’re wrestling with the same extractor issues, don’t hesitate to reach out to Beretta. Knowing that the company stands behind its product like this is comforting.
5. Problem with the Firing Pin
Now, let’s talk about a real showstopper problem: the firing pin issue on the Beretta APX. While testing this gun, I discovered that the firing pin had a bad habit of sticking out too far, getting stuck in a forward position.
Why is this a big deal? Well, it could cause an out-of-battery detonation, escalating to case ruptures and, in worst-case scenarios, risking serious injury.
The moment I realized what was happening, all testing was put on pause. Safety first, folks.
Unfortunately, this wasn’t something I could solve on the fly, so I took pictures to document the
issue and reached out to Beretta’s support team immediately.
They were responsive and offered to send a new slide, asking for the faulty one back for further investigation. If you run into this issue, the key takeaway is to stop using the gun right away and consult with professionals.
It’s a simple step but one that underscores the critical importance of responsible gun handling and observation.
5 Alternatives of Beretta APX
1. Beretta 80X Cheetah
A product of Beretta’s craftsmanship, the 80X Cheetah offers a classic design with modern touches. It’s a .380 ACP caliber firearm, known for its compact size and ease of use.
2. Beretta APX A1
The APX A1 is a sibling in Beretta’s APX series, designed with modularity in mind. It offers smooth shooting and is easier to customize, thanks to its modular build.
3. Glock 19
A fan-favorite for concealed carry, the Glock 19 offers a compact design without sacrificing magazine capacity. It’s reliable, accurate, and has a reputation that precedes it.
4. Glock 17
The Glock 17 is often considered the standard for 9mm semi-automatic handguns. Known for its dependability and lightweight frame, it’s a choice firearm for law enforcement and the military.
5. Walther PDP
A newcomer in the arena, the Walther PDP focuses on ergonomics and a superior trigger. It features a customizable design, making it a flexible option for various shooting needs.
Alright, let’s wrap this up. The Beretta APX is undeniably a solid firearm that offers a lot in terms of reliability and functionality.
But I’ve encountered issues that could make any gun owner pause. However, it’s essential to note that many of these problems are not deal-breakers.
Whether it’s changing the type of ammo used or installing an Oversized Slide Stop, most of these issues can be resolved with a little effort.
And let’s give credit where it’s due: Beretta’s support team is responsive and stands behind its products.
So yes, it’s got its challenges, but it’s an otherwise excellent firearm.
Is it OK to dry fire a Beretta APX?
Long-term dry firing your Beretta APX may result in damage to the striker.
What does APX stand for in Beretta?
The name APX refers to “Advanced Pistol X,” indicating its modular design that allows for caliber and frame size changes.
Is a Beretta better than a Glock?
Will a Beretta fire if dropped?
The pistol will not fire when dropped, as the firing pin safety remains engaged unless the trigger is pulled.