4 Beretta Neos Problems You Must Know

Last Update:

I’ve had hands-on experience with the Beretta Neos, having put it through its paces in various field scenarios. Even in a stellar piece like this, I’ve encountered a Beretta Neos Problems.

I’ve encountered a couple of recurring issues, specifically feeding problems, issues with the lever, extraction problems, and firing failures. 

Don’t worry; I’ve got your back! In this article, I will break down each of these common issues and, more importantly, offer you some actionable solutions.

Trust me, by the end, you’ll be much better equipped to deal with any snags that might come your way.

Beretta Neos Issues & Quick Solutions

Feeding ProblemCheck magazine, spring, ammo, and clean the chamber
Problem with the LeverAlign the guide rod and check for obstructions
Extraction ProblemDisassemble, realign the spring, or replace extractor
Firing FailureCheck for recall status and get necessary updates

4 Beretta Neos Problems & Solutions

1. Feeding Problem

Nothing gets on my nerves like a feeding issue when I’m out in the field. Here’s the deal: the cartridge should slide smoothly from the magazine into the chamber, right? Well, sometimes it doesn’t. 

You pull the trigger, and nothing. Maybe you hear a click or don’t, but you know something’s off. Usually, this kind of problem can be traced back to the magazine, the magazine spring, or even the ammunition you’re using. 

These things don’t always play nice together. It might also be a simple issue of dirt or grit messing with the mechanism, preventing the cartridge from sitting properly in the chamber.


Alright, so here’s what worked for me. First off, let’s check that magazine. Is it dented? Are the feed lips in good shape? If there’s visible damage, you’ll probably need a new one. But let’s say it’s all good. Next, take a look at the magazine spring. 

Maybe it’s weakened over time and needs replacing. Still no luck? Time to inspect the ammo. Make sure you’re using factory rounds, not reloaded ones; those can be finicky. Lastly, clean out any dirt or grime from the chamber and the magazine. 

When I took these steps, my feeding issues cleared right up. Trust me, a clean gun is a happy gun.

2. Problem with the Lever

Alright, let’s get into it: the lever issue. When I was out and about, giving my Beretta Neos a good field test, I hit a snag with the takedown lever. 

This little guy just refused to cooperate. It felt stuck, wouldn’t move how it was supposed to, and basically made disassembling the firearm a real chore. 

After a closer look, it turned out the guide rod was causing interference. A malfunctioning takedown lever makes maintenance and safety checks difficult, so this isn’t something to brush off.


So, what did I do? First, I locked the slide back to give myself some room to work. I noticed the guide rod was a little off-kilter, not parallel with the slide as it should be. A gentle nudge got the rod into the correct, straight position.

And just like that, click! The takedown lever moved smoothly, and I was back in action. If you ever find yourself struggling with a stubborn lever, make sure to check that guide rod. 

A quick alignment might be all you need to get things working right again.

3. Extraction Problem

Okay, let’s dive into another hiccup I faced: the failure to extract. Yep, you heard that right; the Beretta Neos didn’t always play nice when it came to spitting out spent shells. I was using TulAmmo ammunition when this issue popped up. 

The worst case? An empty shell got stuck right in there and wouldn’t come out. Trust me, that’s not something you want happening. 

Manually racking the slide did nothing. So there I was, with a jammed-up firearm and the usual troubleshooting methods were failing me.


Let’s get into how I solved this sticky situation. First, I completely disassembled the firearm. I wanted to make sure the spring was in the correct position because sometimes that’s the culprit. 

After reassembling it, I gave it another go, and the issue seemed to clear up. It was a sigh of relief, to say the least. But look, if you’re facing a persistent extraction problem even after these steps, it might be time to get in touch with Beretta’s customer service. 

They might recommend replacing the extractor, and that’s something you’d want to do sooner rather than later.

4. Firing Failure

Now, this is a biggie. Although I personally didn’t experience it, there have been reports of the Beretta Neos firing unintentionally. 

That’s right, just going off without anyone pulling the trigger. As you can guess, this is more than a minor inconvenience; it’s a severe safety risk. 

An unintentional discharge not only jeopardizes your safety but also that of those around you. Firearms are meant to be controlled tools, and an uncommanded shot undermines that principle.


Luckily, Beretta stepped up and addressed this issue. They initiated a recall to specifically fix this unintended discharge problem. 

Head to Beretta’s website or call their customer service for details. Safety should always be your top priority, and taking steps to ensure your firearm is up to standard is crucial.

2 Alternatives to Beretta Neos

1. Ruger Mark IV

The Ruger Mark IV is a versatile .22 caliber pistol, ideal for target shooting and small-game hunting. It’s user-friendly with its one-button takedown for quick disassembly.

2. Beretta Nano

The Beretta Nano is a compact 9mm pistol designed for concealed carry. Its modular design allows for easy customization and maintenance.

Final Thoughts

No firearm is perfect, and the Beretta Neos is no exception. I’ve laid out the problems I encountered, from feeding issues to lever malfunctions and even extraction problems. 

But here’s the deal: every issue had a fix, whether it was something I could tackle myself or required getting in touch with Beretta’s customer service. 

After taking these corrective measures, the Beretta Neos turned out to be a reliable piece. So, despite some hurdles, it’s a firearm that can offer solid performance if you’re willing to give it a little care. 


Why was Beretta Neos discontinued? 

The Beretta Neos was discontinued due to a recall for safety concerns and the expiration of its California certification for sale in March 2011.

What is the smallest caliber handgun for self-defense? 

The smallest caliber recommended for self-defense is 380 ACP.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Leave a Comment