I’m a gun enthusiast, and recently, I’ve been putting the Canik METE SFT through its paces. I’ve tested this pistol in various conditions and scenarios to see how it stacks up.
In this article, I’m going to tell you about some common METE SFT Problems I’ve faced with the Canik METE SFT. Yep, from recoil problems to a sticky slide, we’re going to dive deep into the details.
But fret not; the aim of this article is simple: to help you get the most out of your Canik METE SFT by addressing its common issues. Stick around, and by the end of this read, you’ll be better equipped to handle any challenges that come your way with this firearm.
Quick Canik METE SFT Problems & Solutions
| Problems | Solutions |
| Recoil Problem | Add a recoil reduction system; use grip sleeves. |
| Slide Stuck | Clean and lubricate the slide; remove any burrs or deformities. |
| Not Returning To Battery | Replace the recoil spring; clean and lubricate the gun. |
| Problem with the Trigger | Install a high-quality aftermarket trigger assembly. |
| Failure To Fire | Clean the firing pin; check the extractor and hammer spring. |
5 Common Canik METE SFT Problems I’ve Encountered
1. Recoil Problem
Alright, let’s jump right into it. One of the first issues I bumped into was recoil. I was expecting a smoother experience, given the reputation of Canik firearms.
But there was a noticeable amount of kickback every time I pulled the trigger. It’s not just uncomfortable; it also impacts your aim for the subsequent shots.
Over time, this can mess with your shooting accuracy and could be an issue in situations where you need rapid and precise shots. Recoil problems aren’t uncommon in handguns, but it’s definitely something you’d want to address.
Solution
So, what did I do to tackle this recoil problem? After some trial and error, I found that adding a recoil reduction system helped me a lot. It minimizes the muzzle flip and the felt recoil.
By attaching a heavier recoil spring, the energy from the gunpowder combustion is absorbed more efficiently, thus reducing the kickback. Another solution that worked for me was installing grip sleeves to get a better hold on the firearm.
These sleeves cushion the impact, making it easier to maintain your grip and aim. These aren’t expensive fixes but trust me, they make a world of difference in how the Canik METE SFT handles.
2. Slide Stuck
Ah, the dreaded stuck slide. It happened to me more than once, and let me tell you, it’s a buzzkill.
You’re out there, feeling the vibe, and then, bang! Or rather, no bang because the slide just won’t budge. When this happens, it can be a real showstopper, putting a halt to your shooting session.
More seriously, in a self-defense scenario, a stuck slide could be disastrous. The friction between the slide and the frame was the main culprit in my case, making the slide movement inconsistent.
Solution
Okay, so how did I resolve this annoying issue? First things first, I cleaned the slide and frame meticulously. Debris or buildup can create added friction, so a good cleaning session is crucial.
Then, I applied a high-quality gun lubricant to the slide rails. It’s amazing what proper lubrication can do. Finally, I checked for any burrs or deformities on the slide or frame that could cause snagging, using fine-grit sandpaper to smooth out any imperfections.
These steps dramatically improved the slide action, making it more reliable during use. Simple fixes, big results!
3. Not Returning To Battery
Here’s another issue I’ve run into: the gun not returning to battery. You fire a round, and then the slide fails to go all the way forward, preventing the next round from chambering.
In plain terms, your gun’s essentially in limbo, not ready to fire the next round. Now, that’s a big deal if you’re in a situation where you need to fire multiple rounds quickly.
When this happened to me, I realized it was severely affecting the gun’s reliability and, needless to say, my confidence in it.
Solution
The solution? First, I checked for any obvious obstructions in the barrel and chamber. Finding
none, I moved on to the recoil spring.
Sometimes, a weak or worn-out spring is the villain. I replaced it with a new, manufacturer-approved recoil spring. Then, I carefully cleaned and lubricated the gun, paying extra attention to the slide rails and the area around the chamber.
These steps managed to resolve the issue for me. It’s crucial to regularly inspect, clean, and lubricate your firearm to keep it operating smoothly.
4. Problem with the Trigger
Now, let’s talk about the trigger, shall we? I found that the trigger on the Canik METE SFT had some inconsistencies, messing up my shooting rhythm.
Sometimes, the pull was smooth; other times, it felt a bit gritty. In some cases, I also experienced a slightly longer reset than I would’ve liked.
It’s frustrating because the trigger is basically the interface between you and the bullet leaving the barrel. So, if that’s not working as it should, well, you’re in for a rough time.
Solution
So, how did I get around this issue? After some research, I decided to replace the stock trigger assembly with a high-quality aftermarket version designed for the METE SFT.
Making sure to stick with a trusted brand, I switched out the trigger and immediately noticed an improvement. The pull was smoother, and the reset was quicker.
For those who aren’t comfortable changing the trigger themselves, a visit to a certified gunsmith can be invaluable. Also, don’t underestimate the power of a good cleaning.
Sometimes, debris in the trigger assembly can cause issues, so make sure that it’s clean as a whistle. Ever since I made these changes, the trigger’s been nothing but reliable.
5. Failure To Fire
Alright, last but definitely not least, let’s tackle the mother of all issues: failure to fire. You line up your shot, pull the trigger, and… nothing. Silence when you least expect it or want it.
This is one of those problems that can shake your trust in a firearm, and rightly so. In my experience, it felt like the gun just let me down at that crucial moment.
Nothing’s more frustrating, especially when you’ve got the perfect sight picture, and your form is impeccable.
Solution
First off, I examined the ammunition; bad rounds can often be the cause of this issue. After confirming the ammo was good, I took a deep dive into the firing pin.
Turns out, it needed some cleaning, and there was also some lint obstructing it. I carefully cleaned it and then reassembled the firearm. Next, I inspected the extractor to ensure it was properly seating the cartridge.
A slight adjustment was needed there. Lastly, I checked the hammer spring to ensure it was providing enough force to strike the firing pin.
After these steps, the problem was history. Proper cleaning and periodic component checks can go a long way in preventing a failure to fire.
Best Red Dots For Canik Mete SFT
Final Verdict
After putting the Canik METE SFT through the wringer, I can say it’s a firearm that has its fair share of issues. From recoil problems to a sticky slide and inconsistent trigger, there are some areas that could use improvement.
But here’s the deal: these aren’t insurmountable problems. With a bit of elbow grease, some minor tweaks, and regular maintenance, this gun turns into a reliable piece of equipment.
The Canik METE SFT is a solid choice that becomes a reliable asset once you’ve addressed its issues.
Top 6 Alternatives to Canik METE SFT
1. Canik Mete SFX
The Canik Mete SFX is the long-slide sibling to the SFT, offering a bit more length for those seeking better accuracy. Ideal for competitive shooting, its design lends itself to quicker, more accurate follow-up shots.
2. Glock 19
The Glock 19 is a staple in the compact handgun world, known for its reliability and ease of use. With a wide range of customization options, it’s a go-to for both new shooters and veterans alike.
3. Canik TP9SF
A member of the Canik family, the TP9SF offers similar ergonomics as the METE SFT but focuses on being a no-frills, reliable service pistol. It has a solid reputation for dependability and comes at an affordable price point.
4. Glock 17
The Glock 17 is essentially a full-size version of the Glock 19, offering a larger grip and increased magazine capacity. It’s a favorite among law enforcement and military for its performance and reliability.
5. Walther PDP
The Walther PDP is designed for personal defense and boasts a textured grip for enhanced control. With its innovative design and customizable options, it’s making waves as a versatile choice for various shooting applications.
6. Canik Mete MC9
The Canik Mete MC9 is an advanced offering that focuses on concealability without sacrificing features. Compact yet feature-rich, it offers modularity that’s designed to adapt to various needs and scenarios.
FAQs
What is the difference between Canik METE SFX and SFT?
The Canik METE SFX has a long slide, while the SFT has a short slide.
Is Canik more reliable than Glock?
The Canik TP9SA offers better accuracy with certain ammo, making it more suited for competition use, but it doesn’t have the long-standing service record of a Glock.
How many rounds does a Canik Mete hold?
The Canik METE SFT has a magazine capacity of 18-20 rounds in 9mm.
Can you put a switch on a Canik?
A switch modification is not standard practice for a Canik METE SFT and would likely void any warranty or compliance with laws.
