Hey Shooters, Welcome to my Glock 45 Problems Blog.
I’m here to share some insights about my time with the Glock 45. I’ve put this gun through its paces, taking it out to the range and even incorporating it into my daily carry routine.
Through all this hands-on experience, it became clear that the gun had its issues; I’ve stumbled upon a few issues that some of you might also face when you’re out and about with your Glock 45.
We’re looking at issues with the barrel, firing failures, ejector problems, feeding issues, and slide difficulties.
I’ll discuss these common glitches and offer some tried-and-true solutions. You know, the kind that helps you keep your Glock 45 operating smoothly.
Quick Fixes For Glock 45 Issues
| Problem | Solution |
| Barrel Problem | Swap original barrel or clean thoroughly after every 100 rounds. |
| Firing Failure | Clean or replace firing pin, switch to quality ammo. |
| Ejector Issue | Avoid +P+ ammo, adjust ejector, extractor, and extractor plunger spring pressure. |
| Feeding Issue | Replace magazine springs, use quality ammo, improve grip. |
| Slide Issue | Experiment with different magazines and ammo, consider replacing or adjusting the slide lever release spring. |
Top 5 Glock 45 Problems & Solutions
1. Barrel Problem
So, let’s dive right into the first issue I encountered with the Glock 45: the barrel challenges. After spending considerable time on the range, I noticed a glaring issue with the barrel, mainly the lack of chamber support.
This didn’t just affect the gun’s performance; it made shooting lead bullets a real pain. The thing would jam frequently, and I even experienced some annoying Brass to Face (BTF) incidents.
Trust me, handling the firearm started to feel like a chore rather than an enjoyable experience it should be.
Solution
Alright, on to the good stuff: the solutions. One approach I took was swapping out the original barrel for a different one with better chamber support and ammo compatibility.
This change was a game-changer, making my time at the range way more enjoyable and hassle-free. However, if you’re keen on sticking with the factory barrel, don’t sweat it; there’s a fix for you, too.
Grab a brass brush and thoroughly clean the barrel after every hundred rounds. It’s a simple solution, but it worked wonders for me, significantly reducing jams and those pesky BTF issues.
2. Firing Failure
So, next on the list is the issue of firing failure. What’s a gun worth if it can’t fire reliably, right?
While using the Glock 45, I ran into situations where the gun just wouldn’t fire. I’d pull the trigger, and no bang, just a whole lot of frustration.
This is more than just a minor inconvenience; it’s a significant flaw that compromises the utility of the firearm, especially in critical situations where every shot counts.
Solution
Okay, so how did I get around this problem? First, I inspected the firing pin and found it was pretty gunked up. A good, thorough cleaning was in order, and that helped a lot.
However, if you’ve already cleaned your firing pin and are still facing issues, you might want to consider replacing it altogether. Another trick I tried was checking the ammunition; poor-quality ammo can sometimes be the culprit.
So, I switched to a more reputable brand, and sure enough, the firing failures went down noticeably. All in all, a clean firing pin and quality ammo turned my Glock 45 from a finicky tool into a reliable companion.
3. Ejector Issue
Alright, let’s move on to the ejector issue. You know you’ve got a problem when your Glock 45 is sending brass flying fifteen feet away! That’s not just a little hiccup; that’s a full-fledged problem right there.
This issue persisted even when I was using weaker ammunition, which should technically reduce the distance the brass is ejected. After some digging around, it appeared the Breech Face cutout was a likely culprit.
Solution
So, how did I go about fixing this? First of all, I decided to steer clear of +P+ ammo; given the already excessive distance the brass was traveling, I didn’t need the extra oomph.
Next, I got down to tinkering with the ejector, extractor, and extractor plunger spring pressure. Now, let me tell you, it was a learning experience! Adjusting these components is not for the faint-hearted or the inexperienced.
If you’re new to firearms, I would advise leaving this kind of tweaking to the professionals. When I finally got the balance right, the ejection distance became much more manageable, and it felt like I had a whole new gun in my hands.
4. Feeding Issue
Next up is a truly vexing issue, the “Fail to Feed” problem. Now, there’s not much more frustrating than firing a few rounds only to find out that your Glock 45 is staring back at you with an empty chamber despite a loaded magazine.
I mean, come on, the gun just wouldn’t feed! The suspects in this case were many: a dirty magazine, a weak spring, a deformed mag, improper insertion, or even subpar ammo. Honestly, identifying the culprit felt like a wild goose chase.
Solution
So, what worked for me? Well, first off, I replaced those magazine springs. It was a bit tedious, sure, but ultimately worth the effort.
Next up, quality ammo. No need to break the bank, but steer clear of the bottom-of-the-barrel stuff; it makes a world of difference. Another hot tip? Make sure you’ve got a firm hold on your firearm when you’re shooting.
This can significantly improve feeding and overall performance. These tweaks worked wonders for me, turning a frustrating issue into a distant memory. Trust me, it’s all about the little things you do right.
5. Slide Issue
Alright, let’s talk about slide issues. Here’s a funny one: my Glock 45’s slide wouldn’t lock back when the magazine was empty.
Oddly enough, it did lock back when manually racking the slide with an empty mag. Now, that’s perplexing!
My thoughts went to a couple of possible reasons: maybe inadvertent pressure on the slide lever release during that final shot or perhaps a mechanical issue with the slide lever release itself.
Solution
Fixing this required a bit of Sherlock Holmes-style investigation. I experimented with different
magazines and various types of ammunition to isolate the problem.
But, the most effective thing was to consider replacing or adjusting the slide lever release spring. Now, this was trial and error, for sure. It wasn’t an overnight fix, but patience paid off.
After a bit of tinkering, I managed to get that slide to behave just as it should. So, if you’re encountering a similar issue, it may be time to roll up your sleeves and get to work!
Top 5 Alternatives of Glock 45
1. Glock 19
A compact, versatile pistol, the Glock 19 is known for its reliability and is often recommended for concealed carry. It’s a 9mm, just like the Glock 45, but is smaller and lighter.
2. Glock 17
This is Glock’s original 9mm handgun, and it’s a full-size option. If you’re looking for a service pistol with a larger frame than the Glock 45, this is an excellent choice.
3. Sig P320
The Sig P320 is a modular, striker-fired pistol known for its ease of customization. With various sizes and calibers available, it’s a strong competitor to the Glock 45.
4. Glock 48
If you’re looking for something slimmer than the Glock 45, consider the Glock 48. It’s a 9mm pistol with a single-stack magazine, making it easier to carry concealed.
5. Glock 43
For those who prioritize concealability, the Glock 43 is a subcompact 9mm that’s easy to hide
and light to carry. It’s less obtrusive but also holds fewer rounds than the Glock 45.
Final Thoughts
Alright, so we’ve dived deep into some of the common issues you might encounter with the Glock 45. While no firearm is perfect, these challenges shouldn’t make you dismiss the Glock 45 outright.
Honestly, most of these problems have straightforward solutions, and once you address them, you’re left with a dependable firearm.
From barrel support to feeding issues, a little bit of elbow grease and some smart adjustments can make all the difference.
So yes, while the Glock 45 might have a few stumbling blocks, it’s nothing that some good old-fashioned troubleshooting can’t fix.
FAQs
Which is better Glock 40 or 45?
Both the Glock 40 and 45 are accurate firearms, but many shooters report softer felt recoil and better accuracy with the 45 ACP.
Is the Glock 45 a good carry gun?
Yes, its compact slide and frame make the Glock 45 a viable option for concealed carry, especially with the right holster.
What is the difference between Gen 4 and Gen 5 Glock 45?
The Gen 5 Glock 45 has a boxier slide but is the same width as the Gen 4. Gen 5 also features beveled corners on the front of the slide, which the Gen 4 lacks.
