How To Sight In A Red Dot Without Shooting – Quick Tips

Last Update:

As an avid shooter, I know how important it is to have a properly sighted scope. I also know how frustrating it can be to go to the range and shoot dozens of rounds trying to get that perfect zero. That’s why today I’m going to show you how to sight in a red dot scope without firing a single shot!

I’ll be discussing how to sight in a red dot scope without shooting. This is an important process to learn if you’re looking to get the most accuracy and precision from your firearm. There are many ways to go about sighting in a red dot scope, and I’ll cover the most popular methods here. So whether you’re a beginner or an experienced shooter, read on for the best tips on how to sight in your red dot sight without shooting.

So, can you sight in a red dot scope without shooting?

You can’t “sight in” your scope properly without shooting, but there are ways to get a close approximation without firing a single shot. The most common method is using a bore sighter, but there are other ways. Let’s look at how to sight in your red dot scope without shooting.

Sighting in a Red Dot Scope Without Shooting

One of the most popular methods for how to sight in a red dot scope without shooting is by using a bore sighter.

A bore sighter is a tool that allows you to see where your bullets will hit at different yardages without firing a shot. This is how most people sight in their red dot scope without shooting because it’s quick, easy, and doesn’t require any ammunition.

Bore sights don’t give you as accurate results as the actual process of aiming your rifle. I’ll go over the entire process below, but first, I’ll talk about how to bore sight. You might think that bore sighting should be very accurate and that if you only shot a foot or yard from the barrel, it would be incredibly accurate.

But You probably want to shoot from 50 to 100 yards, and a minor imperfection in how the laser fits into the barrel can make a big difference over that distance.

The bore sighting is a quick and dirty way of getting more accuracy than you have when first mounting the scope. It’s not meant as a replacement for a proper sighting but can be a helpful temporary measure until you get to a range.

Bore Sighter Tools

There are three types of bore sighter tools, but the most popular is a Laser Bore Sighter. It works by pinpointing your target with laser light and helping you line up for an accurate shot.

  1. Laser bore sighter
  2. Optical boresighter
  3. Visual boresighting

1. Laser Bore Sighter

This is the most popular type of bore sighter because it’s quick, easy, and relatively accurate. It works by projecting a laser beam onto your target, allowing you to see where your bullets will hit.

The main advantage of using a laser bore sighter is that it’s much easier to use than an optical or visual bore sighter. You don’t need to be as precise when lining up the tool, and it’s easier to see the laser beam in low light conditions.

However, laser bore sighters are more expensive than other types of bore sighters. They also require batteries, which can die at inopportune times.

If you’re looking for a quick and easy way to sight in your red dot scope without shooting, a laser bore sighter is the way to go.

2. Optical Bore Sighter

This method is a bit more complicated but works similarly to the laser tool. You connect the optical to the base of the weapon barrel and make sure it is aligned. Then you align the weapon’s lens with the scope. When you focus on the red dot, you can align it with the reticle indicated by the scope.

3. Visual Bore Sighter

You simply aim through the barrel of your rifle at your target. You remove the slide from your rifle and aim your rifle at the desired target on a stable table or stand. You change the position of your barrel until it aligns with your target.

Advantages of Red Dot Sighting

Aiming with a red dot makes you much more likely to hit your target. It can benefit you when hunting or shooting. It’s a good skill.

You can aim at your target and then shoot. Red dot sights are designed to make aiming easier, simpler, and faster for the shooter.

They increase the speed of aiming at your target. You’ll spend less time ensuring everything is properly aligned when using a red dot sight. This tool has so much potential, and it also improves your accuracy.

You don’t have to change your focus when you are looking at the target. You look at the reticle and make sure everything is properly aligned. It doesn’t magnify so that you can hit more accurately!

You can shoot with both eyes if you use a red dot sight. This way, you can still see your surroundings very well while concentrating on the target. This is also ideal for moving targets. Once you set the red dot to the correct distance, you can quickly align the target.

If you’re shooting in a low-light environment, the red dot is even more useful for you! It allows you to see your target even easier than usual.

Quick Tips

  • It would be best if you found the centerline of your scope. This line runs through the middle of the reticle (the crosshairs). Once you’ve found it, draw an imaginary line from the centerline to the top of the front sight post. This line is your sightline.
  • Next, you need to find the point of aim. This is the point on the target that you want your bullet to hit. For this example, we’ll use the bullseye as our point of aim.
  • Now that you know your sightline and point of aim, it’s time to align them. To do this, you’ll need to adjust the elevation and windage on your scope until the crosshairs are lined up with the point of aim.
  • Once you’ve done that, you should get a pretty good idea of where your bullet will impact the target. Of course, there’s no substitute for firing a few rounds and making fine adjustments until you’re dead on, but this method will get you close without ever having to pull the trigger.
  • There you have it! Now you know how to sight in a red dot scope without shooting. Following these simple steps can save you a lot of time.


Sighting in a red dot scope without shooting is a great way to save time and money. Using one of the methods described above, you can get your red dot sighted in quickly and easily. So what are you waiting for? Get out there and start sighting in your red dot scope!

Thanks for reading!

If you have any questions or comments, please feel free to leave them below. We would love to hear from you.


One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Leave a Comment