Cyelee CAT Micro Problems You Should Be Aware of

Published on:

As someone who’s spent considerable time in the field, testing and evaluating various firearms accessories, I’ve had a unique opportunity to closely examine the Cyelee CAT Problems.

My hands-on experience with this device has been an eye-opener, revealing several issues that users like you might face. 

In this article, I’ll delve into four common problems I’ve encountered with the Cyelee CAT Micro: dot misalignment after impact, loss of zero consistency, sensitivity to external forces, and the inadequacy of its locking mechanism for adjustments. 

Dot Misalignment After ImpactSecure internal components and use a robust mounting mechanism.
Loss of Zero ConsistencyEnsure correct torque settings and use thread-locking compounds on mounting screws.
Sensitivity to External ForcesMaintain tight mounting points.
Inadequate Locking MechanismApply non-permanent thread-locking fluid on adjustment screws and regularly check and readjust settings.

Cyelee CAT Micro Issues & Their Solutions

1. Dot Misalignment After Impact

In my field experience with this red dot sight, one of the most prominent issues I’ve encountered is the misalignment of the dot after even minor impacts.

This was quite apparent when the sight experienced slight jolts or taps. What should have been negligible impacts led to significant shifts in the dot’s position. 

This misalignment is a critical flaw, especially in situations where reliability is paramount. It’s not just about the inconvenience; it’s a matter of accuracy and safety. 

When you’re out in the field, the last thing you want is your sight betraying you after a small bump or jostle. It’s as if the internal alignment mechanism is too sensitive or perhaps not secured enough to withstand the usual rigors of field use.


To tackle this issue, my approach involved a twofold solution. Firstly, ensuring that all internal components of the sight were tightly secured became a routine check before any field use. 

This preventative measure sometimes helped in reducing the impact of jolts on the dot’s alignment. However, the more significant part of the solution was to modify the mounting of the sight. By using a more robust mounting mechanism, and ensuring that the sight was attached firmly to the firearm with the correct torque, the sensitivity to impacts was notably reduced. 

These adjustments didn’t completely eradicate the issue but did improve the sight’s resilience to minor impacts. It’s a workaround that requires some technical know-how but can make a noticeable difference in the field.

2. Loss of Zero Consistency

During my time testing this red dot sight, a recurring problem was its loss of zero consistency. This issue became evident when, after several rounds of shooting, the point of impact began to deviate from the point of aim. 

Initially, the sight would be spot on, but with continued use, especially in rapid shooting scenarios, the accuracy deteriorated noticeably. 

This inconsistency is problematic, particularly for activities that demand precision, like competitive shooting or hunting. The sight seemed to struggle with maintaining its settings over an extended period of use, which suggests potential flaws in its design or construction. 

The loss of zero not only undermines confidence in the equipment but can also be a significant liability in situations where accuracy is crucial.


To mitigate the loss of zero consistency, I focused on improving the stability of the sight’s mounting. Ensuring that the sight was firmly and correctly mounted to the firearm made a noticeable difference. 

Using a torque wrench, I applied the manufacturer’s recommended torque settings, which provided a more secure attachment. Additionally, using thread-locking compounds on the mounting screws helped maintain the sight’s alignment over longer periods and under varied shooting conditions. 

While these adjustments didn’t completely resolve the issue, they did enhance the sight’s ability to maintain its zero for longer periods, improving reliability and accuracy during extended use. 

3. Sensitivity to External Forces

In my field testing of this red dot sight, its excessive sensitivity to external forces was a significant issue. This problem was most evident when the sight was subjected to minor bumps or vibrations. 

Such small impacts, which are quite common in normal usage, resulted in noticeable shifts in the dot alignment. This sensitivity is a major concern, particularly in dynamic environments where the firearm may be subjected to various movements. It raised questions about the sight’s reliability under normal operational conditions. 


Key part of the solution was ensuring that all mounting points were secured tightly and checked regularly. This reduced the amount of movement the sight experienced during firing and other activities. These measures did not completely eliminate the problem but did provide a noticeable improvement in the sight’s stability. 

Regular maintenance and careful handling became essential practices to minimize the effects of external forces on the sight’s performance.

4. Inadequate Locking Mechanism for Adjustments

In my experience with this red dot sight, one notable problem was the lack of an adequate locking mechanism for adjustments.

This became apparent when the settings, once adjusted for a specific range or condition, would gradually shift over time or with repeated use. 

Without a secure locking system, the adjustments for windage and elevation were prone to unintentional changes, especially under typical field conditions where the sight might be jostled or bumped. 


To counter this problem, I implemented a makeshift solution by using non-permanent thread-locking fluid on the adjustment screws. 

This helped in keeping the adjustments more secure and reduced the frequency of unintentional changes. While this was not a perfect solution, it did provide a degree of stability and reliability to the sight’s settings. 

Additionally, I made it a habit to regularly check the adjustments before and after use, ensuring they remained as set. 

Alternative to Cyelee CAT Micro 

1. Shield RMS-C

The Shield RMSC is a compact and reliable red dot sight, known for its durability and dependability in various shooting scenarios. Specifically designed for quick target acquisition, the Shield RMS-C offers shooters the advantage of faster and more accurate aiming.

2. Holosun 507K X2

Holosun 507K X2 is renowned for its versatility, providing dual reticle options that cater to a wide range of aiming preferences.This red dot sight stands out with its ability to utilize both solar and battery power sources, ensuring extended usage without worrying about running out of power.

3. Springfield Hex Wasp

The Springfield Hex Wasp boasts a sleek and modern design that not only enhances the aesthetics of your firearm but also offers a clear and precise sight picture.It is particularly well-suited for concealed carry handguns, providing users with a discreet and effective aiming solution.

Final Verdict

In conclusion, the Cyelee CAT Micro red dot sight exhibits some notable problems, but with the right adjustments and precautions, it can become a reliable companion for your shooting needs. 

The issues of dot misalignment after impact and loss of zero consistency can be addressed by ensuring a secure and correctly torqued mounting. Sensitivity to external forces can be mitigated by reinforcing the external casing and maintaining tight mounting points. 

While these solutions may not entirely eliminate the problems, they significantly enhance the sight’s performance and reliability. With these adjustments and a diligent maintenance routine, the Cyelee CAT Micro red dot can offer a satisfying shooting experience, ensuring your accuracy and confidence remain intact.


Is RMS and RMSc the same?

The RMS and RMSc are related but distinct. The RMSc is a slimmer version of the RMS, designed specifically for single-stack pistols like the Glock 43, Smith & Wesson Shield, and 1911 models.

What is the most common red dot footprint?

The Trijicon RMR footprint is arguably the most common and widely adopted footprint in the red dot sight market today.

One Request?

I worked hard on this post to help the shooters community. it would help me a lot if you consider sharing it on social media network

BecauseSharing Is Caring..

Because Sharing Is Caring..

Leave a Comment