Hey Shooters! Welcome to Trijicon RMR Problems Blog.
The Trijicon RMR is a prevalent reflex sight among shooters and hunters due to its toughness, preciseness, and speed in target identification. Like any product, though, it has its share of flaws.
Numerous problems with the Trijicon RMR have hampered its functionality and irritated users. These problems, which range from sight alignment issues to issues with battery performance, have raised questions about the sturdiness and efficiency of the sight.
To assist you in choosing whether to buy or use the Trijicon RMR reflex sight, we’ll explore its most frequent issues, its root causes, and potential fixes in this article.
Whether you are a skilled shooter or an inexperienced one, knowing the issues with the Trijicon RMR can guide you to optimize your use of this optic and steer clear of any downfalls.
So let’s review the details and problems with the Trijicon RMR.
9 Trijicon RMR Problems To Be Aware Of
Following are some typical problems with the Trijicon RMR Type 2 and their fixes:
1. Battery Life Issue
A CR2032 battery energizes the RMR Type 2, and the amount of usage will impact how the power source lasts. A few individuals have complained that the battery drains fast or the sight abruptly shuts off.
Ensure the battery is installed correctly and ensure all contacts are clean. Use a reliable battery, and always have a backup on hand. Besides that, you can extend battery life by switching off the sight when not being used or lowering the intensity settings.
2. Flickering Or Ghosting
Some users have complained that the reticle flashes or has a ghost image.
A loose power supply connection or grimy power supply contacts are frequent causes of this. Ensure the battery is fitted properly and the contacts are properly cleaned. Replace the battery if the issue continues, or contact Trijicon customer support.
3. Loose Or Wobbly Mount
According to some users, the RMR Type 2 has been known to become loose or sway while mounted.
Ensure the mount is fitted correctly and all bolts are clamped according to the recommended torque values. You may also employ a thread locker to help avoid the bolts from getting undone. Get in touch with Trijicon customer service if the issue continues.
4. Zeroing Issue
The RMR Type 2 has been difficult for some users to zero.
Ensure the sight is mounted correctly and the clamps are clamped according to the suggested torque specs. When zeroing the sight, use the appropriate equipment and adhere to the manufacturers’ instructions. If you’re still having trouble, seek help from a qualified gunsmith or optics expert.
5. Damage From Recoil
According to some users, the RMR Type 2 has been known to sustain damage and even come off under extremely powerful recoil.
Ensure the mount is installed correctly and the mounting screws are tightened according to the recommended rotation. Use a mount made for strong recoils, such as the RM34 mount from Trijicon. You may also employ a thread locker to help avoid the bolts from loosening. Call Trijicon customer support if the issue doesn’t go away.
6. Water Damage
The RMR Type 2 is not completely waterproof, according to some users, and it may sustain standing water if immersed in water or subjected to heavy rain.
Although not completely waterproof, the RMR Type 2 is classified as water-resistant. The Trijicon RMR sight can withstand some humidity exposure but should not be immersed or exposed to heavy rain. If the sight gets wet, make sure it is completely dry before using.
7. Lens Scratches
A few users have complained that the RMR Type 2’s lens is easily scratchable, which may reduce the reticle’s clarity.
Keep fingers and abrasive objects away from the lens. To clean the lens, apply lens cleaning fluid or a super absorbent cloth. Contact Trijicon customer service to request a substitute if the lens is scuffed.
8. Compatibility Issues
A few users have complained about mounting and gun compatibility issues.
Before purchasing, ensure the RMR Type 2 is compatible with the mounting system and gun you aim to use. Ensure the mount is fitted properly and the sight is firmly attached to the weapon. Contact Trijicon client service for support if you are still experiencing compatibility problems.
9. Inconsistent Zero
According to some users, based on the light levels, the RMR Type 2 can either be too vibrant or not vibrant enough.
Set the reticle’s light levels to the ideal level for the illumination conditions. Use a new battery or a higher luminance setting if the Trijicon RMR sight is not vibrant enough. Try using a lower luminance setup or protecting the lens with a shade if the RMR sight is too vivid.
Note: These are just a few negative user experiences, but if you carefully handle the Trijicon RMR sight, you might not experience these problems. Even though I handled the RMR sight carefully, I didn’t experience any issues until I unintentionally dropped it in a deeper swimming pool than usual.
Trijicon RMR Overview
The Trijicon RMR is a compact and extremely hard reflex sight that provides incredible performance and versatility to shooters of all skill levels.
The RMR’s 3.25 MOA red dot reticle enables rapid and accurate target acquisition. This Trijicon RMR reflex sight was made to withstand rough climates because it is top-quality 7075-T6 aircraft-grade aluminum.
The Trijicon RMR can withstand strong recoil and a variety of environmental factors due largely to its shock-absorbent construction and waterproofing to a depth of 20 meters. The RMR’s clear and vivid reticle in any lighting situation is provided by its energy-efficient LED light source.
Furthermore, the battery lasts at least four years of nonstop usage at the mid-level bright light setting guaranteeing that users can rely on this sight for a long time without fretting about repeated battery changes. The Trijicon RMR is simple to install and can be mounted on many firearms using a common Picatinny rail.
Alternative Of Trijicon RMR
The Trijicon RMR Type 2 is just one of many options that provide comparable specs and performance. Here are some popular alternatives:
The Holosun HS507C is a simple, challenging red dot sight with a 2 MOA dot and 32 MOA circle reticle. It can be mounted on a broad range of weapons and has a battery lifespan of up to 50,000 hours.
The Vortex Venom is a convenient and adaptable red dot sight with a 3 MOA dot reticle and close to 150 hours of battery life. It can be installed on a range of surfaces and is made to sustain substantial recoil.
Aimpoint Acro P-1
The Aimpoint Acro P-1 is a tenacious, water-resistant red dot sight with a 3.5 MOA dot reticle and a standby time of close to twelve months. It is made to work with handguns as well as other types of weapons, and it has a low-profile architecture.
Leupold Deltapoint Pro
The Leupold DeltaPoint Pro is a convenient, reliable red dot sight with a 2.5 MOA dot reticle as well as a 500-hour standby time. It is designed to endure strong recoil and hazardous climates and is interoperable with several mounting frameworks.
The Trijicon SRO is a bigger and more sophisticated edition of the RMR Type 2 with a bigger view area, a luminous reticle, and a broader variety of luminance settings. It is designed to be used with pistols as well as other kinds of handguns, and it can be assembled on a broad spectrum of systems.
The best substitute for the Trijicon RMR Type 2 will likely depend on your personal needs and choices. Before buying something, consider aspects like size, mass, reticle type, battery capacity, and compatibility with your gun.
Know The Difference Between Trijicon SRO & RMR.
On the whole, the Trijicon RMR Type 2 is a top-notch red dot sight that provides rapid and precise target acquisition and is made to resist robust use and challenging environments. It has some drawbacks, though, such as poor battery life, poor brightness, and incompatibility with some mounting options and weapons.
If you are thinking about purchasing the Trijicon RMR Type 2, you should carefully consider your particular requirements and likes. Think about things like the kind of firearm you’ll use it with, the mounting system you’ll need, and the illumination you’ll be working in.
It is also crucial to remember a few additional red dot sights offered, including the Holosun 507C, Leupold Deltapoint Pro, Vortex Venom, Aimpoint Acro P-1, and Trijicon SRO. These sights are more suitable for your particular needs and offer comparable specifications and performance.
The Trijicon RMR Type 2 or another sight will entirely depend on your individual needs and spending capacity. Before choosing a course of action, it is crucial to conduct depth review and carefully weigh all of your alternatives.
How long is the Trijicon RMR’s warranty?
A limited lifetime warranty that covers both material and workmanship issues is provided with the Trijicon RMR.
How do I change the brightness on the Trijicon RMR?
The Trijicon RMR has an incredibly simple knob that you can turn to change the reticle’s light output. To change the brightness, easily turn the knob in a clockwise or counterclockwise motion.
Is the Trijicon RMR interoperable with night vision equipment?
Yes, the Trijicon RMR works with night vision equipment and has a night vision mechanism that lets you change the reticle’s luminance.
Can you hunt with a Trijicon RMR?
The Trijicon RMR is suitable for hunting.
Does the Trijicon RMR have a cover to protect it?
Yes, a cover that helps shield the lens from scuffs and other damage is included with the Trijicon RMR.